|
|
Health effects of ionizing and non-ionizing radiation
Gottvald, Martin ; Neoral, Jiří (referee) ; Bača, Petr (advisor)
This diploma thesis deals with electromagnetic radiation in its frequency spectrum. It also divides radiation into ionizing and non-ionizing. The principle of its effects and possible health problems from radiation exposure are also described. Hygienic limits – the maximum allowable and reference values of non-ionizing radiation are analysed too. The thesis should prove that the things of everyday need do not threaten the lives of human beings and are in compliance with the regulation No. 1/2008 Sb. on Health Protection Against Non-Ionizing Radiation. Measurement of low-frequency part is carried out with the cooperation of The National Institute of Public Health. Measurement of high-frequency part was carried out in 3 flats. The aim of this measurement was to find out the change of power density with the moving in a flat and the influence of the barriers (in this case walls).
|
|
|
Design of a space heating system with a heat pump air-water and solid fuel source for heating the family house
Španihelová, Kateřina ; Elcner, Jakub (referee) ; Katolický, Jaroslav (advisor)
The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.
|
|
|
Electronic ballast for sodium lamp
Eliáš, Jaroslav ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
The aim is to get acquainted with the way the management and regulation of sodium lamps. This knowledge is then applied to design your own gear. The introductory section describes the basic characteristics of discharge light sources. Their behavior was verified by measuring and findings were used to create diagrams, mainly the control circuit. Theoretical design is developed by individual functional parts of the inverter.
|
|
|
Heating of The Residential House
Toboláková, Andrea ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The main goal of the thesis is to design a heating system and hot water heating, a newly built residential building in the Prague. The theoretical part is focused on the circulation pumps and their design. In the calculation part is processed the proposal of heating systems, the heat sources, the water heater and other equipment. The last part of the project includes a technical report and drawing documentation at the level of implementation of the project.
|
|
|
Power supply for medium pressure UV lamps
Hurdálek, Tomáš ; Zemánek, Miroslav (referee) ; Boušek, Jaroslav (advisor)
UV radiation has a very wide range of uses in industrial production and disinfection. At present, medium-pressure mercury lamps are used for the reliable generation of UV radiation. The aim of this work is to get acquainted with the principle of individual types of lamps and methods of controlling their power and to design an electronic ballast with continuous power control and, if necessary, verify the correct function of its most important parts.
|
|
|
Drive of control ring PVE Merkersbach
Skoupý, Jiří ; Veselý, Jindřich (referee) ; Kašpárek, Jaroslav (advisor)
This thesis is focused on determination of forces acting to regulation ring of water power plant Markersbach (Germany). Solution of the problem is realized for two variants of servomotors – with and without servomotors acting surfaces balancing. Next topics of this thesis are strenght calculation of piston rod and bottom of the servomotors. Minimalization of the size of servomotors plungers by change of regulation kinematics has been done and minimal pressure in the pressure tank is determined. At the conclusion of this thesis received results are mentioned and its interpretation has been done. This thesis is provided for company Litostroj Power, ČKD Blansko Engineering, a.s.
|
|
|
The language of EU legal documents
Rybakova, Alexandra ; Walek, Agata (referee) ; Smutný, Milan (advisor)
V této práci jsem na konkrétních příkladech nařízení a směrnic EU týkajících se vědy a techniky uvedla a analyzovala specifické rysy jazyka používaného v dokumentech EU. Znalost konkrétních, specifických příkladů v nařízeních EU týkajících se vědy a techniky může být přínosná pro pochopení některých nařízení. V této práci jsem vysvětlila, jaké zvláštní rysy mají právní dokumenty Evropské unie, a ukázala jsem příklady těchto rysů.
|
|
|
Power supply for medium pressure UV lamps
Hurdálek, Tomáš ; Zemánek, Miroslav (referee) ; Boušek, Jaroslav (advisor)
UV radiation has a very wide range of uses in industrial production and disinfection. At present, medium-pressure mercury lamps are used for the reliable generation of UV radiation. The aim of this work is to get acquainted with the principle of individual types of lamps and methods of controlling their power and to design an electronic ballast with continuous power control and, if necessary, verify the correct function of its most important parts.
|
|
|
Electronic ballast for sodium lamp
Eliáš, Jaroslav ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
The aim is to get acquainted with the way the management and regulation of sodium lamps. This knowledge is then applied to design your own gear. The introductory section describes the basic characteristics of discharge light sources. Their behavior was verified by measuring and findings were used to create diagrams, mainly the control circuit. Theoretical design is developed by individual functional parts of the inverter.
|
|
|
Heating of The Residential House
Toboláková, Andrea ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The main goal of the thesis is to design a heating system and hot water heating, a newly built residential building in the Prague. The theoretical part is focused on the circulation pumps and their design. In the calculation part is processed the proposal of heating systems, the heat sources, the water heater and other equipment. The last part of the project includes a technical report and drawing documentation at the level of implementation of the project.
|
guest ::
